 |
 |
 |
 |
|
|
| |
| COLLOID MILL |
| |
 |
|
| |
|
Sreenex Colloid Mill gives high shear and centrifugal force generated between the rotor and stator are exerted on the product. The toothed profile of the rotor and stator, combined with a high flow rate, generate additional gravitational force to give through and even processing. Is an Ideal machine for homogenising, emulsifying, grinding, dispersing, mixing, extracting, etc. The toothed rotor-stator system used in Sreenex colloid mill guarantees the micro crushing of a wide variety or raw materials with the product being simultaneously dispersed and homogenized. The mill offers a micro-distribution of 5 to 10 microns. The robust design and assured quality of the Sreenex colloid mill guarantee a long service life with minimum maintenance. |
| |
| Techinical Specification |
|
| |
| Model |
SCM-5 |
SCM-7.5 |
| Output* |
100 to 1500 Ltrs/Hour |
150 to 2500 Ltrs/Hour |
| Particle Size Reduction* |
5 to 10 Micron |
5 to 10 Micron |
| Hopper Capacity |
15 Ltrs |
26 Ltrs |
| Electrical Motor |
5 HP/3.7 Kw/3000 RPM/415 V/50 Hz/3 Phase |
7.5 HP/5.5 Kw/3000 RPM/415 V50 Hz/3 Phase |
| Floor space in mm |
Direct Drive
Belt Drive
|
800 (L) X 500(B) X
1250 (L) X 500(B) X 1250(H) |
900(L) X 550(B) X
1350 (L) X 500(B) X 1400(H) |
| Case dimension in mm |
Direct Drive
Belt Drive |
650 (L) X 650(B) X 1300(H)
1450 (L) X 700(B) X 1400(H) |
700 (L) X 700(B) X 1400(H)
1550 (L) X 700(B) X 1500(H) |
| Net weight in Kgs |
Direct Drive
Belt Drive
|
180 (approx)
200 (approx) |
225 (approx)
250 (approx) |
| Gross weight in Kgs |
Direct Drive
Belt Drive
|
250 (approx)
275 (approx) |
300 (approx)
360 (approx) |
|
| |
| *Depending on nature of the product and size of particle reduction |
| |
| |
Application
Pharmaceutical, Food, Dairy, Confectionery, Cosmetics, Chemicals, Textile, Ink, Ceramics, Detergent, Rubber and other industries. |
| |
| |
| Optional |
 |
 |
Water jacketed model |
|
S.S 316 in place of S.S.304 contact parts |
|
Flameproof electrical fittings |
|
GMP model in place of standard model |
|
Discharge spout for viscous products |
|
 |
| |
|
| |
DISCHARGE SPOUT |
| |
|
| Salient Features |
|
|
|
All contact parts are made out of 304 stainless steel |
|
Coupling provided between motor shaft & Rotor shaft for easy maintenance |
|
High outputs |
|
Simple in construction |
|
Versatile in use |
|
Easy to clean |
|
Maximum adjustment for minimizing milling gap |
|
Consistency in performance |
|
Oil seal & motor protection cover are provided |
|
Leak proof neoprene sealing provided to avoid leakages |
|
 |
| |
STATOR & ROTOR |
| |
| |
| |
| |
| |
  |
| ^Top |
|
| |
|
|
|
|
|
|
|
